Cheap Modern Comfortable Container House

How is the Folding Container House installed?
Even a small concrete home can take months to complete the foundation, not counting the interior renovations. But if you want to use a folding Container House or Flat Pack Container House, Detachable Container House, then the construction can be done immediately, and the cost is also very favorable, and it can also ensure that the container house can be put into use quickly. But how are such houses constructed? What are the installation steps?

wire stability
Special attention should be paid to the use of cranes in the construction of folding container houses, so the inspection of the steel wires must be carried out first, and the stability of the steel wire slings must be ensured without the risk of possible breakage. At the same time, pay attention to whether the overall frame is reliable. Only by ensuring that the crane can remove the paint smoothly, and then install the middle support rod, can the stable use of the container house be guaranteed.

push away a wall
Because the foldable houses have already been designed with a folding design in the middle, workers only need to push away the position of one wall, and then fix it with screws. Then go to push away the position of the other wall, and also tighten the screws. Because the interior of the folding container house has been prefabricated, the later construction is also guaranteed.

installed in a stable position
If the fixing work of the foundation has been completed, it can be hoisted with a crane and placed in a fixed installation position. We must pay attention to the treatment of the ground first, to ensure that there are no pollutants, and the ground must also be leveled. It is necessary to make sure that there is no one around before the later house installation can be carried out, so that the installation is also guaranteed.

do a good job checking
The final inspection of the folding container house is also very important, in fact, the main thing is to carry out the acceptance of the overall construction. Especially in the folding position, all the screws must be tightened, and a second inspection is required. If there is any looseness, it may affect its safety, so the acceptance work is also very important. .